Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

5. The instrument is ready to measure samples.

Anchor
icallink

...

ICALization

1. Start and warm up instrument.

...

4. Flush the sample introduction system with 3% HNO3 for 5 minutes and Q-Water for 5 minutes. (the instrument introduction system must be clean!!!)

5. Place ICAL solution in a designated spot, typically in spot 0/07. In windown right click on the ICAL solution location/spot and select move to location.

6. Once the autosampler has moved to/been placed in the ICAL solution Select the function "ICALization" in the "System" menu.

67. Follow the instructions displayed by the software. 

...